A warning to those looking to mod their motorized bicycles:

Most, if not all, of the hacks and mods featured on this site were made by individual hobbyists. If you are new to working with 2-stroke bicycle engines, please by aware that there's a possibility that a mod featured on this site could seriously damage your engine. Please don't try any mod from this or any other site unless you fully understand what you are doing. The owner of this blog will not be held responsible for both material and bodily damage caused by performing a modification featured on this blog. Also remember that opening up your engine may void your warranty!

Tuesday, September 6, 2011

Build your dream fuel tank with fiberglass!

You don't need expensive tools or metal-working skills to build your own custom fuel tank for your motorized bike!  If you're looking for an in-frame tank, or just something more sleek than the stock teardrop tank, fiberglass may just be the answer!


This instructables.com tutorial shows you how to make your very own fuel tank using fiberglass and fuel-safe epoxy resin!  The results look very professional, IMO.


What would make this project even cooler is if you could design your fuel tank as a computerized 3D model and paste together a prototype with Pepakura, and base your tank off that!
Posted by at

3 comments:

  1. mtSeptember 23, 2011 at 9:09 PM

    the instructables.com link is 404....could you re-post? Great blog

    ReplyDelete
  2. RavenstineSeptember 23, 2011 at 9:16 PM

    Thanks for letting me know! I fixed the link.

    ReplyDelete
  3. UnknownOctober 29, 2014 at 10:54 AM

    Where can I buy this tank & how much?

    ReplyDelete

Subscribe to: Post Comments (Atom)