A warning to those looking to mod their motorized bicycles:

Most, if not all, of the hacks and mods featured on this site were made by individual hobbyists. If you are new to working with 2-stroke bicycle engines, please by aware that there's a possibility that a mod featured on this site could seriously damage your engine. Please don't try any mod from this or any other site unless you fully understand what you are doing. The owner of this blog will not be held responsible for both material and bodily damage caused by performing a modification featured on this blog. Also remember that opening up your engine may void your warranty!

Sunday, February 10, 2013

High quality laser-cut gaskets

I'm getting back into motorized bicycling again, and I recently purchased a new 66cc motor(I jacked up the crank on my last one and I could never get it to run properly again).  Since I'm cleaning up my motor before use, I needed replacement gaskets.

Ebay user recapacita772012 is selling high-quality laser cut gaskets for our little bike motors are made of a high-temperature acrylic-nitrile-latex & organic fiber compound that proves to last longer and hold together better than the stock gaskets.  And thank god, the intake/exhaust gaskets are cut to the proper size!

2 comments:

  1. Finally I won't have to cut the gaskets by hand anymore! Glad to see this blog come back to life.

    ReplyDelete
  2. Hi... Nice post. Well, you have discussed here a few things about High quality laser-cut gaskets and such type of problems you are facing. Hope you will get a solution for your problems soon.

    http://heliobikes.com/

    ReplyDelete