A warning to those looking to mod their motorized bicycles:

Most, if not all, of the hacks and mods featured on this site were made by individual hobbyists. If you are new to working with 2-stroke bicycle engines, please by aware that there's a possibility that a mod featured on this site could seriously damage your engine. Please don't try any mod from this or any other site unless you fully understand what you are doing. The owner of this blog will not be held responsible for both material and bodily damage caused by performing a modification featured on this blog. Also remember that opening up your engine may void your warranty!

Saturday, October 22, 2011

DIY bike repair stand


Doing work on your MB can be troublesome without the use of a stand.  For some reason bike repair stands can be expensive, so why not build your own from hardware store parts?  Geoldr from motorbicycling.com was able to build one with some pipe from Home Depot for $65, although I imagine you could achieve something functionally similar for cheaper using a combo of PVC and construction re-bar.

4 comments:

  1. Bicycle Repair Stand is the most valuable instrument as a cyclist i can think. So this is really good initiative blog.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  2. Yes i completely agree with what riyad said, because every cyclist should have all the instruments, thank you. PARK TOOL REPAIR STAND.

    ReplyDelete