A warning to those looking to mod their motorized bicycles:

Most, if not all, of the hacks and mods featured on this site were made by individual hobbyists. If you are new to working with 2-stroke bicycle engines, please by aware that there's a possibility that a mod featured on this site could seriously damage your engine. Please don't try any mod from this or any other site unless you fully understand what you are doing. The owner of this blog will not be held responsible for both material and bodily damage caused by performing a modification featured on this blog. Also remember that opening up your engine may void your warranty!

Saturday, August 20, 2011

Thinner head gasket for more horse-power

Some people run their engines without a head gasket for higher compression, thus slightly-greater horse power.  But this can be risky and can result in air leaks that can harm performance and the engine.  Instead of throwing out the head gasket all-together, just get a thinner one!

Sick Bike Parts sells replacement head gaskets that are thinner than the stock gasket, and better yet, they're made in the USA!

49cc/50cc Gasket with 6mm stud holes
66cc/80cc Gasket with 6mm stud holes
66cc/80cc Gasket with 8mm stud holes


No comments:

Post a Comment